Uchwyt na odcinek ATC
(Automatic Tool Change)
Essential item for robotic machining!
Tool loading and unloading with straight line movements only
Tool change system for robotic machining
Contributes to investment savings by eliminating the need for multiple hand changers
Easy tool change without the need for a power source
30% increase in productivity due to reduced tool change time
Amazing facts!
── Introducing ideas and technologies ──
The ATC stub holder is a quick-change system for robot machining that enables the tip of the hand changer to be changed to multiple tools.
The changing system uses a mechanical mechanism and requires no power source such as electricity or air, so it can be installed directly on existing robots.
It also enables speedy tool changes, contributing to ‘improved productivity’, ‘reduced investment’ and ‘multi-product support’.
Reduction of capital investment costs
Good!
By adopting ATC stub holder
40% investment cost reduction
Improved productivity
Good!
By adopting ATC stub holder
30% improved productivity
This is the point!
Easy replacement of robot hand changer tips
Excellent!
This is the point!
Stub holder replacement procedure
Excellent!
ATC stub holder removal
ATC stub holder mounting
Development / product concept
“Current status and challenges”
- There is a growing need for dry and MQL machining without the use of cutting oil as an environmental consideration.
- In dry MQL machining, chips cannot be washed away with cutting oil, so it takes time to clean the machine and chips adhere to the spindle.
“Development points”
- The chip collecting holder is equipped with a chip collecting cover that utilises centrifugal force to control the discharge of chips.
- The holder can collect chips and discharge them at a predetermined position, improving the machine environment due to chip scattering faced in dry and MQL machining and contributing to improved productivity.
Processing examples
Tool name
ATC stub holder
Machining work
Cylinder head
Work material
Process
Brushing of mating surfaces
Cutting conditions for mounting surface
Cutting speed: Vc = 236 m/min
Feed: f = 9 mm/rev
Cutting conditions for hole A
Cutting speed: Vc = 71 m/min
Feed: f = 4 mm/rev
Cutting conditions for hole B
Cutting speed: Vc = 22 m/min
Feed: f = 6 mm/rev
Product specifications
- Tool specifications
Tool name
Uchwyt na odcinek ATC
Target processes
For deburring of product mating surfaces, etc.
Target equipment
Cooperative robots, industrial robots
ATC power source
not required
- Applicable work examples
Transmission case
