Products / Services
Rotary tool: Drilling tool
For aluminium
PCD drill for one-shot machining. Achieves high precision machining and contributes to improved productivity.
A drill with chip-breaker that solves chip problems. No need to rebuild the chip-breaker when regrinding.
Drill for general hole drilling. Can also handle multi-step and complex workpiece shapes.
Drill for one-shot machining. Outstanding finishing accuracy with drill edge + special finishing reamer edge.
Twisted drill for high efficiency machining. Supports feed up to 15% of drill diameter.
1-edge PCD reamer for interrupted cutting. Excellent guideability and outstanding roundness.
1-edge PCD reamer with 4 point guides for deep hole machining. High precision finish with outstanding rotational balance.
For castings and steel
Twisted drill for general hole drilling. Highly efficient machining with low thrust thinning
Back jet coolant drill for one-shot machining. Excellent finished surface roughness with drill edge + 4 specially finished edges.
Made by ACE in Poland
For cast iron cutting
For steel cutting
For through holes
High precision reamer for through holes. Reduced tool cost by using inexpensive standard materials.
Reamers for high precision and high efficiency machining. Outstanding roundness with unequal division.
Services
Products can be revived through repair, remodeling, and repolishing! Services that contribute to Sustainable Development Goals (SDGs).
A service that identifies the causes of chatter and proposes countermeasure tools based on optimal machining conditions.
A test cut service that provides technical proposals based on machining point analysis, moving from problems to problem resolution.
A service that uses 3D printing technology to solve problems faced by customers at production sites.
Analysis services that deliver value to customers by providing insights from engineers familiar with the manufacturing site.
Rotary tool: holder
Boring holder
Boring holder for one shot finishing. Achieves process shortening and contributes to productivity improvement.
Boring holder for one shot finishing suitable for intermittent hole machining. Pursuing high efficiency.
A holder that suppresses machining chatter. High damping performance with a damper tailored to vibration characteristics.
A holder that achieves automatic cutting edge correction on a machining center. Contributes to investment reduction.
Holder for helical processing. This one piece can process various hole diameters and support multi-product production.
Dedicated holder
Holder for valve seat processing. The line-up ranges from direct mounting to ATC specifications.
Holder for valve seat processing. High precision machining with the shortest GL due to the slim shape.
Guided boring holders. Machining of high-precision bored holes on machining centres.
Can be manufactured to match the honing machine. We offer a wide variety of types.
Honing head that can be processed with general-purpose machines. Reduces investment and supports multi-product production.
We provide a wide variety of line bars with superior manufacturing technology and highly reliable manufacturing.
A line bar that can be processed with a machining center. No support jig required, reducing investment.
Angular unit suitable for various processes. High rigidity, lightweight, and compatible with miniaturization.
Holder for tooth chamfering and phrasing processes. Driven mechanism for use in general purpose machines.
Cutter arbor for skiving. Hydraulic mechanism contributes to high precision machining.
Holder for collecting chips during dry machining. Reduces man-hours of machine cleaning.
Quick-change holder for robot machining. Reduced investment by changing only the tool tip.
Ultra-compact spindle for robot machining. With just 60 mm square and max 20,000 min -1 and a core runout accuracy of 2µm.
Deburring holder
Deburring holder for double-sided deburring. Achieves efficient deburring of complex shapes.
Deburring holder for crossholes. The compression mechanism removes burrs neatly.
Deburring holder for copying processing. Reliably removes burrs from complex contours.
Deburring holder for surface processing. The adjustment mechanism maintains the stiffness of the brush for excellent cutting performance.
Jig / Chuck
Round jig
Chuck for tool grinders designed with flexibility. Reduced changeover man-hours.
Collet-type ID/OD chuck jig designed for high-precision machining of gears with stable runout accuracy and short changeover time.
High-precision hydraulic OD chuck jig with stable runout accuracy and space saving design.
Chuck jig for hobbing machine. This single machine can handle a wide variety of products, reducing setup time.
Mandrel for gear processing / measuring. Achieves high runout accuracy with easy operation.
Flat jig
A low-profile 5-axis machining machine vise that maximizes the machining area and improves workability.
Separate type flat jig for machining center. Supports a wide variety of workpieces with easy stage changes.
Flat jig for ring shape. Automatic stage change by adjusting the clamp position using spindle movement.
Slippers for transporting separate workpieces. Split structure supports multi-product production.
Jigs for line boring machining. Reduced investment by enabling processing on general-purpose machines.
3D printed resin products
Robot hand
Deburring hand with high float function. Greatly reduces teaching time.
A lightweight hand compatible with small robots. Achieved lightweight and high rigidity with CFRP material.
Jig
Quick, Economic, Cubic (QEC), a tool observation stand that allows you to easily observe tools anytime, anywhere.
A jig that significantly reduces the time required to photograph tools using a microscope.
Value added parts
A jig that prevents chip accumulation with a chip discharge mechanism. Easy to install on existing jigs.
A lightweight cover that prevents chips from scattering. Improve productivity by solving chip problems.
Scraper for removing adhesive. The cutting edge has high removal power and is replaceable at low cost.
Material handling
Introducing the features of material handling holders. Including usage instructions and usage examples.
A holder that allows workpieces to be transported within a processing machine. Just install it on your machining center.
Double-sided processing is achieved by reversing the workpiece inside the processing machine. Equipped with open/close end detection sensor function.
A wrench holder that automates bolt tightening in machining centers.
Sweeps away dirt and chips for a comfortable working environment. Improved maintainability, comfort grip performance and high durability.
Electric vehicle related
Introducing initiatives in the battery and motor fields for the shift to vehicle electrification.
Extreme durable, engineered Tungsten Carbide FSW tools for high-volume production where tool failure is not an option
Nippers for cutting motor windings. Achieves long life and high quality with outstanding sharpness.