Mikro Welt

Tool-specific laser outer diameter measuring instruments

A measuring Instrument made by a tool manufacturer for tool manufacturers

Efficient and improved precision tool measuring instrument

Anywhere

Saves space and can be set up anywhere

Easy to use

Chuck the tool and click once

Quick

Measurement done only in 2 seconds

High precision

Repeatability of 1 micron or less

Solves the old problems of “slow, inaccurate, and complex”

Conventional issues of tool makers in tool measurement when using microscope, dial, and high-functional tool-dedicated measuring instruments:

Slow

Correcting of parallelism, focusing, zero-point adjustment, setup adjustment, frequent trips between the workroom and examination room

Error

Alignment of the line and dial, fine adjustments, differences in worker skill levels

Complicated

Frequent program settings and confusion caused by extra functions

Remove differences between workers, improve measuring speeds, stabilize measuring precision with Mikro Welt!

Fast

Chuck the tool on the machine side in the workroom and click once

Precise

Up to 16,000 measuring points in one second; Precise repeatability of under 1 μm

Simple

Requires no extra programming; specialized for measurement of runout and outer diameter; accessible to anyone

Features

01 Anywhere

“Nano x5” measures just 405 x 611 x 411 mm and allows easy on-site installation
“Nano9” measures 900 x 700 x 350 mm and has a dust-proof, space-saving design for setup in a machining site. Can be set up on an office desk; allows you to take measurements right there when necessary while machining.

02 Easy to use

Measuring technology developed with 80 years of expertise in the carbide tool industry;
Measures tool outer diameter and runout instantly with high precision by chucking the tool and clicking once.

Measuring technology developed by Kiyama Alloy Corporation with 80 years of expertise in the carbide tool industry; designed unique hardware under the supervision of a leading developer of a major equipment manufacturer. Also developed software that was designed specifically for ease-of-use based on the concepts of being easy-to-use by anyone and requiring no extra rogramming.

Performs all projectable measurements simultaneously in two seconds, including OD, angle, tip radius, shoulder radius, C face, step length, virtual point, and virtual line setting, makes pass/fail judgments, and transfers measurements to Excel automatically.

More than 100 measurement tools are available through combinations, to cover not only simple dimensional measurements but also tool-specific complex measurements.

03 Quick

Measure multiple locations simultaneously in two seconds per location, with a single trigger
Measurement sampling of 16,000 times per second

04 High precision

The unique chucking system (patent pending) enables everyone to obtain the same measurement results.
Attains repeatability of 1 μ under any environment. Repeatability with a ∅ 6 end mill (∅ 6 x 50 L) that comes with a calibration certificate

Mikro Welt - nano9

Specifications
Model	Mikro Welt nano9
Measuring Unit	KEYENCE LS-9030 Measuring precision complies with this component
Repeatability	±1.0μm (with calibration certificate using d6x50L endmill)
Size, Weight	700×900×350mm, 50kg Ensure space of 10cm or more from both sides and backside of main unit
Operating Method	Measurement operations using specialized software on a PC OS: Runs on Windows 10 or later (Memory: 8 GB or more) Interface: The main unit and PC connect via USB type B (2.0)
Compatible Standards	EMC: Conforms to EN55011 and IEC61000 Safety: PSE
Safety function	Interlock on operator operation side; stops operation when released Emergency stop switch is installed on the front face
Accessories	Power cable, Instruction Manual, attachment (V jig)
Application	Mikro Welt nano9 APP VER1.00 Required CPU min Pentium III 400 MHz or higher Supported OS: Windows 10 Required Memory Capacity min 8GB or more Required Display: VGA (800×600 pixels) or higher, 256 colors or more Required Free Hard Disk Space: 1GB or more Required Interface: Must be equipped with a USB interface

Mikro Welt - nano X5

Specifications
Model	Mikro Welt nano x5
Measuring Unit	KEYENCE TM-X5000 Measuring precision complies with this component
Repeatability	±0.03μm to ±2.0μm
Positioning	±0.2μm to ±2.5μm
Size	405×611×411
Operating Method	Measurement operations using specialized software on a PC OS: Runs on Windows 10 or later (Memory: 8 GB or more) Interface: The main unit and PC connect via USB type B (2.0)
Compatible Standards	EMC: Conforms to EN55011 and IEC61000 Safety: PSE
Accessories	Power cable, Instruction Manual, attachment (V jig)
Application	Mikro Welt nano X5 APP VER1.00 Required CPU min Pentium III 400 MHz or higher Supported OS: Windows 10 Required Memory Capacity min 8GB or more Required Display: VGA or higher, 256 colors or more Required Free Hard Disk Space: 1GB or more Required Interface: Must be equipped with a USB interface

Accuromm Central Europe

/ A tool engineering company that supports all work related to tools