Accuromm Central Europe

/ A tool engineering company that supports all work related to tools

Accuromm Central Europe

A tool engineering company that supports all work related to tools

Solid endmills

Kyocera 2KMB

Ball nose carbide micro/mini endmill for hardened materials

DC ø0.1-1mm, DC ø1-3mm, DC ø3-16mm, For pocketing, Hard material, Heat resistant alloy, ISO-H, ISO-M, ISO-P, ISO-S, Nickel alloy, No-coolant, Radius-corner, Stainless steel, Steel, Titanium alloy, Z2

Kyocera 2KMBL

Ball nose carbide micro/mini endmill for hardened materials

DC ø0.1-1mm, DC ø1-3mm, DC ø3-16mm, For pocketing, Hard material, Heat resistant alloy, ISO-H, ISO-M, ISO-P, ISO-S, Long neck, Nickel alloy, No-coolant, Radius-corner, Stainless steel, Steel, Titanium alloy, Z2

Kyocera 2QFSM

2-edge coated carbide endmill

Aluminium, Cast iron, DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, ISO-K, ISO-M, ISO-N, ISO-P, No-coolant, Square-corner, Stainless steel, Steel, Z2

Kyocera 3QFSM

3-edge coated carbide endmill

Aluminium, Cast iron, DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, ISO-K, ISO-M, ISO-N, ISO-P, No-coolant, Square-corner, Stainless steel, Steel, Z3

Kyocera 4FCX-KCD

4-edge diamond coated carbide endmill for CFRP

CFRP, DC ø3-16mm, For slotting, ISO-O, No-coolant, Z4

Kyocera 4QFRM-H

4-edge coated carbide endmill

DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, Hard material, ISO-H, No-coolant, Radius-corner, Z4

Kyocera 4QFRM-VE

4-edge coated carbide endmill

DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, ISO-M, ISO-P, ISO-S, No-coolant, Radius-corner, Stainless steel, Steel, Titanium alloy, Z4

Kyocera 4QFRM-VGL

4-edge coated carbide endmill

Aluminium, Cast iron, DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, ISO-K, ISO-M, ISO-N, ISO-P, ISO-S, No-coolant, Radius-corner, Stainless steel, Steel, Titanium alloy, Torus, Weldon, Z4

Kyocera 4QFSM-H

4-edge coated carbide endmill

DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, Hard material, ISO-H, No-coolant, Square-corner, Z4

Kyocera 4QFSM-VE

4-edge coated carbide endmill

DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, ISO-M, ISO-P, ISO-S, No-coolant, Square-corner, Stainless steel, Steel, Titanium alloy, Z4

Kyocera 4QFSM-VG

4-edge coated carbide endmill

Aluminium, Cast iron, DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, ISO-K, ISO-M, ISO-N, ISO-P, ISO-S, No-coolant, Square-corner, Stainless steel, Steel, Titanium alloy, Z4

Kyocera 4RFH

4-edge coated roughing carbide endmill for difficult to cut materials

2xD, 5xD, Coolant, DC ø3-16mm, For ramping, For shouldering, For side milling, For slotting, Heat resistant alloy, ISO-M, ISO-P, ISO-S, Nickel alloy, Radius-corner, Stainless steel, Steel, Titanium alloy, Z4

Kyocera 5QECL-VTL

5-edge coated carbide endmill

Cast iron, Chamfer-corner, Coolant, DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, For trochoidal milling, ISO-K, ISO-M, ISO-P, ISO-S, Stainless steel, Steel, Titanium alloy, Weldon, Z5

Kyocera 5QFRM-VE

5-edge coated carbide endmill

DC ø16-25mm, DC ø3-16mm, For dynamic milling, For helical milling, For pocketing, For ramping, For shouldering, For side milling, For slotting, ISO-M, ISO-P, ISO-S, No-coolant, Radius-corner, Stainless steel, Steel, Titanium alloy, Z5

Kyocera 5RFH

5-edge coated roughing carbide endmill for difficult to cut materials

2xD, 5xD, Coolant, DC ø3-16mm, For ramping, For shouldering, For side milling, For slotting, Heat resistant alloy, ISO-M, ISO-P, ISO-S, Nickel alloy, Radius-corner, Stainless steel, Steel, Titanium alloy, Z5

Kyocera 6RFH

6-edge coated roughing carbide endmill for difficult to cut materials

2xD, 5xD, Coolant, DC ø3-16mm, For ramping, For shouldering, For side milling, For slotting, Heat resistant alloy, ISO-M, ISO-P, ISO-S, Nickel alloy, Radius-corner, Stainless steel, Steel, Titanium alloy, Z5

Unimerco CarbonMill

Coated carbide endmill

CFRP, CFRTP, DC ø3-16mm, ISO-O, No-coolant, Z10, Z12, Z4, Z6, Z8